Dont ask me why it worked but it did. Thank you very much for your time and help. It was a bit of challenge to get at the upper 2 bolts that hold in the radio but it came out pretty much as described in the video. We tried unsticking things, spinning cds, and trying to see what was stuck, but to no avail. Should I take it to the dealer and will they replace a new one for me? This acts as a reset and may bring the changer back to working conditions. Does it take long to change disks from time to time? After doing nothing, one day I just pressed the eject button and out popped a cd.
Hook up a known working speaker in a non-working position for testing. Nakamichi - Display looks like hieroglyphics, flickers, missing segment, missing digits, or no display, parts are not available for this repair. That was the easy part. Remember to remove all plugs as you go except the one that covers the opening of the cd unit cover this with some tape so it does not mark your wood trim. Error code 3 means a mechanical error concerning the laser lens and around the lens, which can be fixed through troubleshooting. I turned the Power back on, but it keeps displaying Error 3 and not playing.
There were so many small springs and things that i knew that one wrong move would mean i would have to buy a new one. But i still dont understand why it didnt come out and why it doesnt read that there is a disc in cd5? I removed the screws that atttach the wood cover to the unit. The cd's were all on their plastic beds, but were stuck up a bit it seemed. There are a few 'tricks' you can try: 1 Disconnect the negative terminal from the battery for 5min then reconnect. I took the unit to my local car hi-fi shop in Worcester. I had the same issue on my 4Runner.
I was playing a disc and half way thru track 10 it skipped then stopped playing. Nakamichi - No audio from one or more speakers. I turned the Power back on, but it keeps displaying Error 3 and not playing. This thing has worked flawlessly for over 2 years. Our local dealership says there is an equalization unit located behind the glove box in need of repair, we have never seen or found one! Our door panel removal guides for Lexus speakers include help with aftermarket speaker installation. I refuse to do that without first trying to un-jam the current unit.
Good luck on finding a solution. I have read that this is most likely the result of a physically jammed disc. If you are handy with socket sets it is not that difficult to take the entire audio system out from the dashboard. New masts available from dealership. This acts as a reset and may bring the changer back to working conditions. I immediately threw the disc in the garbage, and the player has been working fine ever since. Asif Asif your need to remove a number of bolt 6 in total 4 below the cd unit and and 2 below the ac unit.
Get your 10mm spanner out of that toolkit you have never used yet! So I suggest just get the whole unit changed, the mechanism will only get worse. We could hear the mechanism trying to work, humming like it was close, but just stuck. Its like i said you wont get a problem like this with a denon cd player or any other cd player. If you have the right tools and are a little bit handy, you should be able to handle the repair and save yourself a few hundred bucks. I spent more time putting them back than the rest of the entire removal and replacement. Then I took out the screws on the side and top that keep the metal top connected.
Common amplifier symptoms - no audio or a thump, thump, thump from speakers. . Has anyone else had any issues using the track advance button. When I tried to go past 5 it just bepped when I pressed the button. Particularly on the '92 Nakamichi system, there is no amplifier in the trunk.
I'm in Central Mississippi and we're having daily highs of 100 degrees! Do all functions have the same volume level? And like i said i dont play them cdwr discs in it, all my cd's are original. The other two are a real bear. No discs will load or eject or play. I read the different solutions on these posts, and tried inserting another cd about one inch into the lower disc opening, while pushing the eject bottom. Make sure to reconnect this before putting it all back together.
I disconnected this from the faceplate side by flipping down the small plastic bar that holds it with a very small screwdriver. Im going to have to look for another cd player now. If you are handy with socket sets it is not that difficult to take the entire audio system out from the dashboard. Factory Car Stereo Repair, Inc. We put the stereo back together and only had 2 tiny screws left and one loose spring that fell out at some point. And i know im not the only one with this problem. But when you push it it doesn't eject, it just goes back to the radio.
After reading severl posts, we tried everything and nothing worked. Please send me the pertinent information asap because we can not drive a car with out a cd player it sleepy at night when we drive a long distance. If you see gear belts off of the gears, reattach them. Sometimes, these players can act up. Before repair, disconnect one of the car battery terminals for several minutes. Before repair, disconnect one of the car battery terminals for several minutes.